MEGADAP Sony E to Nikon Z Autofocus Adapter (ETZ21 Pro)


In stock. Ships IMMEDIATELY. Free international shipping via Fedex. 2 years warranty.

The ETZ21 Pro builds upon the foundation set by its highly acclaimed predecessor, the ETZ21, delivering the same exceptional autofocus (AF) functionalities and capabilities.

– Nikon ZF, Z8, Z9, Z30 and Zfc compatible. (or any newer models)
– Turn SONY E lenses Autofocus on Nikon Z cameras (Full-frame and APS-C)
– The only adapter in the market that also supports Nikon Z APS-C cameras
– Support E mount third-party lenses, e.g. Sigma, Tamron, Zeiss, Voigtlander, Samyang
– Viltrox and Yougnuo lenses are currently not supported
– 2mm thin
– Support AF-S, AF-C, AF-F, Eye-AF, pinpoint focusing and Face detection
– Smooth focusing performance during video shooting
– Support auto aperture
– Support the use of manual lenses
– Support AF/MF button on the lens body
– Firmware upgradable through Nikon Z camera (with adapter + lens installed)
– Suitable for Nikon ZF, ZFC, Z30, Z50, Nikon Z5, Nikon Z6, Nikon Z6 ii, Nikon Z7, Nikon Z7 ii, Z8, Z9 cameras

*If users wish to use multiple E-mount lenses with ETZ21 Pro, when changing lenses, please turn off the camera and then remove ONLY the E-mount lenses originally being mounted on the camera. Removing both the lens and adapter may cause adapter malfunctions.
* Warranty service will be provided by us for purchase inside this store or through authorized dealers. Contact to confirm dealers validity.
* Battery drain may happen while the adapter is on camera. Remove the adapter from camera after use to avoid battery drain.
SKU: ETZ21PRO Category:


Firmware Update Tutorial



Notice: Handling the Megadap ETZ21 Pro

1) No ‘Hot Switch’ of lenses.
Always switch OFF the camera before you remove the lens or the adapter
2) No touching on connecting pins/pads
Do NOT touch the connecting pad/pins with your bare hands. Static electricity produced may damage the electronic components in the adapter
3) Leave the adapter on camera
When you swap between different E-mount lenses, switch off the camera and leave the ETZ21 Pro on the camera. Then unmount and mount another E-mount lens.
4)Don’t turn the lens+adapter frequently
Do not turn the lens+adapter back and forth frequently when camera is on or off.


Authorized reseller in Hong Kong

Exclusive products

Special category of products